5.1.2 PA CONFIGURATION, PASSENGER VESSELS 20
5.1.3 PA/GA CONFIGURATION, ALL VESSELS 20
5.2 INSTALLATION GUIDE 20
5.2.1 PLANNING 20
5.2.2 GENERAL 20
5.2.3 LOUDSPEAKER SELECTION AND SOUND PRESSURE LEVEL 23
5.2.4 NUMBER OF LOUDSPEAKERS 23
5.2.5 CABLE ARRANGEMENT 23
5.2.6 ZONES 23
5.2.7 AMPLIFIERS 24
5.2.8 SHORT CIRCUIT PROOF LOUDSPEAKERS 24
5.2.9 COMPASS SAFE DISTANCE: 25
5.3 GENERAL ALARM ADJUSTMENT 25
5.4 FEEDBACK/INTERFERENCE CANCELLATION 25
5.4.1 LOCAL MUTE 25
5.4.2 TEMPORARY RECORDING 25
5.5 POWER 26
5.6 GLANDS 26
5.7 FERRULING 26
5.8 MARKING 26
5.9 FASTENING 27
5.10 PRECAUTIONS 27
5.11 CABLE REQUIREMENTS 27
6 CONFIGURATION 27
6.1 INTRODUCTION 27
6.2 ACCESSING THE CONFIGURATION TOOL 27
6.2.1 CONNECTING TO SERVICE PORT 28
6.2.2 SETTING A STATIC ADDRESS LOCALLY 29
6.2.3 IP ADDRESS AND LOGIN INFORMATION 29
6.3 CONFIGURATION – GENERAL 30
6.4 CONFIGURATION – AUDIO OUTPUT 31
6.5 CONFIGURATION – AUDIO INPUT 32
6.6 CONFIGURATION – CONTROL UNITS 33
6.7 CONFIGURATION – USERS 34
6.8 CONFIGURATION – EXTERNAL ALARM INPUTS 35
6.9 CONFIGURATION – SNMP/NETWORK 37
6.10 CONFIGURATION – ADVANCED 38
6.11 BACKUP AND RESTORE 40
6.12 UPLOAD NEW SOUNDS 41
7 OPERATING PROCEDURE 42
7.1 INTRODUCTION 42
7.2 PREREQUISITES 42
7.3 OPERATING DESCRIPTION 42
7.3.1 EMERGENCY PAGING 42
7.3.1.1 PRIORITY 42
7.3.1.2 DESCRIPTION 43
7.3.2 PAGING 44
7.3.2.1 PRIORITY 44
To Next Page
Loading...
Need help?
General
