Chapter 4 ADJUST MENU SETTINGS
4.7 I/F DEVICE
4-35
4
NSTALLATION MANUAL
Heading Correction
1 Open MAG Compass Setting - Heading Correction .
"Heading Correction" menu appears.
This item is set as to whether or not the heading bearing is to be corrected.
Switches between On and Off.
Correct Value
1 Open MAG Compass Setting - Correct Value .
"Correct Value" menu appears.
Press the cursor key or turn the [MULTI] control to correct bearing and angle.
The bearing and angle can be corrected between W9.9° and E9.9°.
To Next Page
Loading...
