Chapter 4 ADJUST MENU SETTINGS
4.14 ERROR ALARM MASK
4-102
4.14.3 CONNECTION DEVICE
Sets the error alarm of connection device.
"Connection Device" operations
1 Open Error Alarm Mask - Connection Device .
"Connection Device" menu appears.
Setting Error Alarm Mask of Connection Device
Sets the error alarm of connection device.
Note:
Do not change the set value carelessly.
If alarm detection is turned off or detection time is changed, be careful
because the alarm may not occur or may be delayed.
Items for the error alarm of connection device
Panel1(Time Out)
Panel2(Time Out)
GYRO(Time Out)
Log(Time Out)
GPS(Time Out)
GPS
1 Open Connection Device - Panel1(Time Out) .
"Panel1(Time Out)" menu appears.
To Next Page
Loading...
