Chapter 4 ADJUST MENU SETTINGS
4.8 COM PORT SETTING
4-40
The setting menu for "TTM" appears.
Select which port you want to use for output.
Operate the same way for the other ports.
Type of port
1. Off
2. Gyro/Compass
3. GPS
4. NMEA1
4.8.5 TX DATA FORMAT
Selects the output format, talker, and transmission interval.
"TX Data Format" operations
1 Open COM Port Setting - TX Data Format .
"TX Data Format" menu appears.
Reference:
When multiple output sentences are selected, data may not be transmitted at the selected
transmission interval.
In particular, the volume of TTM, TLL, TLB, and TTD data containing TT and AIS target
information increases as the number of targets increases, and as a result, the transmission
interval becomes longer.
To Next Page
Loading...
