To Next Page

To Previous Page

Chapter 4 ADJUST MENU SETTINGS

4.3 RADAR ECHO

4-9

NSTALLATION MANUAL

4.3 RADAR ECHO

Sets radar echo.

 "RADAR Echo" operations

1 Open RADAR Echo from the Adjust Menu.

"RADAR Echo" menu appears.

4.3.1 NOISE LEVEL ADJUSTMENT

Adjusts the noise level.

 Noise Level Adjustment

1 Open RADAR Echo - Noise Level .

"Noise Level" menu appears.

Press the cursor key or turn the [MULTI] control to set the noise level.

The noise level can be set between 0 and 255.

Reference:

The noise level is adjusted at the factory.

When adjusting the noise level after installation, perform only fine-tuning within ±5.

Questions and Answers:

Need help?

Do you have a question about the JRC JMA-3334 and is the answer not in the manual?

JRC JMA-3334 Specifications

General