Chapter 4 ADJUST MENU SETTINGS
4.9 GPS
4-54
4.9.3 SBAS RECEIVER SETTING
Sets for a JRC SBAS receiver.
Because the information the SBAS receiver receives from the satellite also includes the
same information as that from DGPS Beacon station, it can perform positioning with
higher precision than GPS.
This setting is available only for JRC SBAS receiver directly connected to the connector
for which "GPS" is engraved at the rear of the cabinet.
Before adjustment
After operation, open "4. Send Data", and send the setting to the SBAS receiver.
"SBAS Setting" operations
1 Open GPS - SBAS Setting .
"SBAS Setting" menu appears.
To Next Page
Loading...
