JRC JMA-3334 User Manual

Chapter 4 ADJUST MENU SETTINGS
4.9 GPS
4-55
4
NSTALLATION MANUAL
 Satellite Search Setting
Sets the selection mode for Satellite number to be used.
1 Open SBAS Setting - Satellite Search .
"Satellite Search" menu appears.
AUTO : Automatically selects the SBAS satellite number
Manual : Manually enter the SBAS satellite number
After setting, open "4. Send Data", and send the setting to the SBAS receiver.
 Ranging Satellite Setting
Set whether or not the SBAS satellite is to be used as a positioning satellite.
1 Open SBAS Setting - Ranging .
"Ranging" menu appears.
Off : Does not use SBAS satellite.
On : Uses SBAS satellite.
After setting, open "4. Send Data", and send the setting to the SBAS receiver.
 SBAS Satellite Number Setting
Sets the SBAS Satellite number to be used.
This setting is enabled when "Satellite Search" is set to "2. Manual".
1 Open SBAS Setting - SBAS Satellite Number .

JRC JMA-3334 Specifications

General

Brand	JRC
Model	JMA-3334
Category	Radar
Language	English