JRC JMA-3334 - Stagger Trigger; Scanner Rotation Speed

Chapter 4 ADJUST MENU SETTINGS
4.6 SCANNER
4-22
4.6.3 STAGGER TRIGGER
Turns on/off the interference reduction function controlled by the transmission repetition
frequency control of the transmitter.
This function is effective when radar interference does not go away.
Reference:
This setting cannot be performed simultaneously with the setting of "4.6.2 PRF FINE
TUNING".
 Stagger Trigger Function
1 Open Scanner - Stagger Trigger .
"Stagger Trigger" menu appears.
Press the cursor key or turn the [MULTI] control to set the stagger trigger.
4.6.4 SCANNER ROTATION SPEED
Sets the scanner rotation speed for each pulse length.
 "Scanner Rotation Speed" operations
1 Open Scanner - Scanner Rotation Speed .
"Scanner Rotation Speed" menu appears.