JRC JMA-3334 - Page 127

Chapter 4 ADJUST MENU SETTINGS
4.9 GPS
4-61
4
NSTALLATION MANUAL
 TD2
Sets the TD value of slave station 2.
1 Open LORAN C - TD2 .
"TD2" menu appears.
Press the cursor key or turn the [MULTI] control to set the TD value.
TD value can be set between 0 and 99.
 TD1 Correction
Enters the propagation time correction value for the TD value of slave station 1.
1 Open LORAN C - TD1 Correction .
Press the cursor key or turn the [MULTI] control to set the correction value.
The correction value can be set between 0.0 and 9.9 μsec.
 TD2 Correction
Enters the propagation time correction value for the TD value of slave station 2.
1 Open LORAN C - TD2 Correction .
Press the cursor key or turn the [MULTI] control to set the correction value.
The correction value can be set between 0.0 and 9.9 μsec.