AFTER-SALES SERVICE
yyyy
yyyy
8
··········· When you Request for Repair ··························································
If you suppose the product may be out of order, read the description in Section 8 carefully and
check the suspected point again.
If it is still out of order, you are recommended to stop operation of the equipment and consult with
the dealer from whom you purchased the product, our branch office in your country or district, or
the sales department in our main office in Tokyo.
z Repair within the Warranty Period
If any failure occurs in the product during its normal operation in accordance with the
instruction manual, the dealer or JRC will repair free of charge. In case that any failure is
caused due to misuse, faulty operation, negligence or force major such as natural disaster and
fire, the product will be repaired with charges.
z Repair after the Warranty Period
If any defective function of the product is recoverable by repair, the repair of it will be made at
your own charge upon your request.
z Necessary Information for Repair
ڏ Product name, model, manufacturing date and serial number
ڏ Trouble conditions (as detailed as possible. Refer to “Radar Failure Check List” in page
8-2. )
ڏ Name of company/organization, address and telephone number
··········· Recommended Maintenance ····························································
The performance of the product may deteriorate due to the secular change of the parts used in it,
though such deterioration depends upon the conditions of operation.
So checkup and maintenance is recommendable for the product in addition to your daily care.
For maintenance, consult with the near-by dealer or our sales department.
Such maintenance will be made with charges.
For further details of after-sale service, contact the JRC Offices in the list at the
end of this manual.
To Next Page
Loading...
Need help?
General
