3-40
Correcting the mark or vertex of a line (Insert / Move Vertex)
With regard to the created user map, a mark or line is corrected.
Procedures 1 Press [MENU] key.
Select 8.Next and press [ENTER] key.
Select 4.NAV Information and press [ENTER] key.
Select 1.Edit User Map and press [ENTER] key.
Select 5.Insert/Move Vertex and press [ENTER] key.
2 Put the cursor on the mark or vertex of a line, and press [ENTER] key.
When the mark or vertex of a line to be corrected is selected, the cross cursor mark will
appear.
3 Move the cross cursor mark to the destination, and press [ENTER] key.
The vertex of the selected mark or vertex of a line is moved to the destination.
To correct another mark or vertex of a line, repeat procedures 2 and 3.
4 Press [ MENU] key.
Menu will be closed.
(Example)
To Next Page
Loading...
