JRC JMR-5425-9X - Stopping a Buzzer; Confirming Alert Contents

Section 3 Common Basic Operations 3-12
3.7.1 Stopping a buzzer
To stop a buzzer (silencing), click the silence button in the alert notification area or press the
[SILENCE] key in the operation unit.
3.7.2 Confirming alert contents
When an alert is generated, the alert message is displayed in the "Alert status area".
The alert type and the number of alerts are displayed by the button.
• Alarm button: Displayed when an alarm is generated. The button is displayed in red. The number
of alarms is indicated on the button
• Warning button: Displayed when a warning is generated. The button is displayed in orange. The
number of warnings is indicated on the button.
• Caution button: Displayed when a caution is generated. The button is displayed in yellow. The
number of cautions is indicated on the button.
1 Click on the button
An alert balloon is displayed.
2 Display the alert detail dialogue by clicking on the Disclosure button.
The alert detail dialogue can be closed by clicking on the Disclosure button again.
The following items are displayed in the detail dialogue.
Display item
Contents
Higher button The details of the alert of the higher priority than the alert that is currently
displayed appear.
Lower button
The details of the alert of the lower priority than the alert that is currently
displayed appear.
Detailed
information
Cause, Status, Date and time (Raised), Details and action (Advice) to be taken
are displayed.
[SILENCE] key
Silence button