JRC JMR-5425-9X - Right Toolbar

2-9 Section 2 Name and Function of Each Unit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1
2.2.5 Right toolbar
The functions of the buttons of the right toolbar are as follows.
Display and Panel Brightness button
The brightness of the screen is switched
within the range from 0 to 100 and the
brightness of the operation unit in 5 levels
from 0 to 4.
For the details, refer to "3.9 Adjusting the
Brightness of the Screen and Operation
Unit".
Message notification button
When this button is clicked on, the dialogue relating to the latest
notification message is displayed among the AIS message tray
and NAVTEX reception information.
For the message dialogue box of each of the information received,
refer to "2.3.2 Information reference windows".
The total number of unread messages is displayed on the badge.
Day/Night button
The display colour on the screen can be
switched to 5 levels according to the
brightness on the bridge.
For the details, refer to "3.8 Switching the
Day/Night Mode ".
MOB (Man Over Board) button
When a person falls overboard, use this
button to mark the own ship’s position
when the button is clicked on, so as not to
lose the sight of the position.
For the details, refer to "3.12 MOB (Man
Over Board)".
Mode switching button
By clicking on this button, the mode can be switched.
The mode is switched repeatedly as [Radar mode]→[Synthesis
mode]→[Radar mode].
For the details, refer to “3.10 Switching Mode”.