JRC JMR-5425-9X - Adjusting and Setting up Equipment (for Services); Service Menu

14-1 Section 14 Adjusting and Setting up Equipment (for Services)
1
14
Section 14 Adjusting and Setting up
Equipment (for Services)
This section describes the methods for radar adjustment, installation verification, and maintenance that
are conducted by the service staff by using the Service menu at installation construction of this
equipment.
Never make adjustments while sailing.
Doing so may adversely affect the radar functions, causing accidents and/or
malfunctions.
14.1 Service Menu
The Service menu consists of three submenus of Adjustment, Installation and Maintenance. To display
the Service menu, a password is required.
[Operation procedure]
Open the Code Input screen by performing the following menu operations.
[Menu] button → Code Input
1 Enter password “0” in the Code Input screen.
When the Code Input screen is closed, open the Service menu by performing the following
menu operations.
[Menu] button → Service
2 Select one of the submenus, ([Adjustment], [Installation], [Maintenance]) and display
the dialogue.