JRC JMR-5425-9X - Returning to the Mode Selection Screen by Terminating Operation; Terminating this Equipment

3-55 Section 3 Common Basic Operations
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1
3.26 Returning to the Mode Selection
Screen by Terminating Operation
[Operation procedure]
Perform the following menu operation to open the Password screen.
[Menu] button → Code Input
1 Enter 9999 and click on the [Enter] key.
Control returns to the Mode Selection screen.
3.27 Terminating This Equipment
When turning off the power supply, do not hold
down the power button of the
operation unit.
Otherwise, a trouble may occur due to termination failure.
1 Press the power supply button on the operation unit.
The power is turned off.
Power button
Please press the 2 keys
simultaneously.