JRC JMR-5425-9X - Setting Screen Capture

Section 13 Setting up the Operation Mode 13-44
13.26 Setting Screen Capture
Set screen capture.
[Operation procedure]
Open the screen capture setting screen by performing the following menu operations.
[Menu] button
→ Settings → Screen Capture
The following table shows setting items.
Setting Item Description of Setting Setting Value
AUTO Capture Interval
Set up the interval at which the Screen Capture
dialogue box is automatically saved. If this is set to
0, the Screen Capture dialogue box will not
automatically be saved.
0 to 999 min
AUTO File Erase
Specify whether or not to delete the screen shot
file automatically.
To enable: Select.
To disable: Clear.
Shortcut
Shortcut Settings Dialogue Box
File Management Display the [Tools] - [File Manager] - [File Management] tab.