JRC JMR-5425-9X - Maintenance & Inspection; Maintenance Functions Executed from Menu; Setting Date;Time;Time Zone

15-1 Section 15 Maintenance & Inspection
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
23
24
24
26
27
Section 15 Maintenance & Inspection
15.1 Maintenance Functions Executed
from Menu
This section explains maintenance functions that are executed from the menu.
15.1.1 Setting Date/Time/Time zone
[Operation procedure]
Open the date/time/time zone setting screen by performing the following menu operations.
[Menu] button → Maintenance → Date/Time/Time Zone
Item
Description
Setting value
Date Sets the year, month and day on the calendar.
For the details of how to use the calendar, refer to
"3.20 Setting a Date and a Time (Calendar
Operation)".
-
Time (LMT) Enters the time. The time entered will be reflected
on the clock.
00:00 to 23:59
Time Zone
(Time différence)
Selects a current time zone. -13:30 to +13:30
(Every 30 minutes)
(UTC standard)
Display Style Selects a display style of year, month, and day. YYYY-MM-DD
MMM DD,YYYY
DD MMM,YYYY
Synchronise with Time
Source(Date/Time)
Sets synchronisation/asynchronisation
of the date
and time by using the time information (ZDA
sentence) from the time information source (GPS,
Ship’s Clock).
Synchronise:
Select
Asynchronisation:
Clear
Synchronise with Time
Source(Time Zone)
Sets synchronisation/asynchronisation
of the time
zone by using the time zone information (ZDA
sentence) from the time information source (GPS,
Ship’s Clock).
Synchronise:
Select
Asynchronise:
Clear
Memo
When [Synchronise with Time Source (Date/Time)] is not checked, the time is reset to the initial
value at the start of power supply. Therefore, set a correct time manually.