JRC JMR-5425-9X - Setting the Stabilisation Mode; Moving Own Ships Display Position (off Centre)

5-21 Section 5 Basic Operation of the Radar
1
2
3
4
5
5
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1
5.4.7 Setting the stabilisation mode
1 Click on the Stabilisation mode combo box in Range and mode information.
2 Select the stabilisation mode.
[GND]: Use the ship speed relative to ground in the stabilisation mode.
[Sea]: Use the ship speed relative to water in the stabilisation mode.
5.4.8 Moving own ship’s display position (Off
Centre)
The own ship’s position can be moved from the display centre to any position within 75% of the display
radius. This function is convenient for observing a wide coverage in any direction.
Memo
• This function is not available on the 96 NM range.
• An own ship display position can be moved within the range in which the own ship display
position and the antenna position do not exceed 75% of the screen radius.
1 Set the Off Centre mode to On by clicking on the [Off Centre] button in range and
mode information.
The Off Centre mode is switched to On/Off whenever the button is clicked on.
When the Off Centre mode is On:
When the Off Centre mode is Off:
The cursor mode is set to the Off Centre mode.
Stabilisation mode
combo box