JRC JMR-5425-9X - Motor Replacement Procedure for NKE-1632

15-31 Section 15 Maintenance & Inspection
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
23
24
24
26
27
15.5.3.2 Motor replacement procedure for NKE-1632
1
Remove the cover.
When replacing a motor,
ensure that the safety switch
of the radar antenna is
turned Off prior to
commencing the
replacement work.
Exercise care not to lose
bolts, screws and other parts
removed from the radar
antenna, as they will be
used again in later steps.
Both left and right side covers need
to be removed to carry out the
motor replacement work.
Loosen the M8 bolts designed to be
protected from falling out at eight
positions, and remove the cover.
Eight M8 fall protected bolts