Section 13 Setting up the Operation Mode 13-22
13.15 Setting an Event Mark
Set a shape and a colour of the mark that is set as an event mark.
[Operation procedure]
Open the event mark setting screen by performing the following menu operations.
[Menu] button → Settings → Event Mark
Contact In (RPU) list
Set a shape and a colour of the event mark that is set by contact input.
Setting Item Description of Setting Setting Value
No.
Display the number for setting the event mark.
Numbers 1 to 3 correspond to Contact In 1 to 3 of RPU.
-
Type
Select a shape of the event mark to be set from the
combo box.
29 mark types
For the details, refer to
“10.5.3 Selecting an
object type”.
Colour Select a colour of the event mark to be set for each
number from the combo box. If Selected Colour is
selected, the colour is selected by the user map colour
of the top screen (refer to 2.2.8 Other Common Area).
White / Grey / Amber /
Magenta / Blue / Cyan
/ Green / Yellow /
orange / Dark Red /
Selected Colour
Contact In (SLC) list
Set a shape and a colour of the event mark that is set by contact input.
Setting Item Description of Setting Setting Value
No.
Display the number for setting an event mark. No.1
corresponds to Contact In 1 of SLC, No.2 corresponds
to Contact In 2 of SLC, No.3 corresponds to Contact In
3 of SLC, and No.4 corresponds to Contact In 4 of SLC.
-
Type
Select a shape of the event mark to be set from the
combo box.
29 mark types
For the details, refer to
“10.5.3 Selecting an
object type”.
Colour Select a colour of the event mark to be set for each
number from the combo box. If Selected Colour is
selected, the colour is selected by the user map colour
of the top screen (refer to 2.2.8 Other Common Area).
White / Grey / Amber /
Magenta / Blue / Cyan
/ Green / Yellow /
orange / Dark Red /
Selected Colour
To Next Page
Loading...
