JRC JMR-5425-9X - Setting Sounds

13-33 Section 13 Setting up the Operation Mode
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
13.23 Setting Sounds
Set volumes of the operation sound, operation error sound, and alarm melody.
When the volume or melody is changed, the selected volume or melody is played back, enabling the
user to set while listening to the sound.
[Operation procedure]
Open the sound setting screen by performing the following menu operations.
[Menu] button → Settings → Sounds
[Volume] tab
Setting Item Description of Setting Setting Value
Key ACK
Set the volume of the sound emitted when the
key is pressed.
Off
Level1 (Soft)
Level2
Level3
Level4 (Loud)
Misoperation Set the volume of the operation error sound. Off
Level1 (Soft)
Level2
Level3
Level4 (Loud)
Response/Notification Set the volume of the control response sound
to external equipment and control completion
notification sound (including the interswitch
control) from external equipment.
Off
Level1 (Soft)
Level2
Level3
Level4 (Loud)
Message Notification Set the volume of the message notification
sound.
Off
Level1 (Soft)
Level2
Level3
Level4 (Loud)
Alert Setting Reminder Set the volume of the sound notifying that the
alarm condition has not been set.
Off
Level1 (Soft)
Level2
Level3
Level4 (Loud)
Navigation 1 Alarm Set the volume of the navigation alarm
sound.
*2
Level1 (Soft)
Level2
Level3
Level4 (Loud)
Navigation 2 Alarm
Navigation 3 Alarm
CPA/TCPA Alarm
Set the volume of the CPA/TCPA alarm
sound.
*2
Level1 (Soft)
Level2
Level3
Level4 (Loud)