JRC JMR-5425-9X - Names and Main Functions of the Mode Screen Common Sections; Menu] Button

Section 2 Name and Function of Each Unit 2-4
2.2 Names and Main Functions of the
Mode Screen Common Sections
This section describes the name of each section of the mode screen and the main functions.
2.2.1 [Menu] button
When the [Menu] button is clicked on, the Top menu is displayed.
For the details of the menu, refer to "3.4 Basic Menu Operations".
Memo
This equipment is operating normally when the [Menu] button is moving in animation mode.
When this equipment is set to a freeze state, the Menu button stops and does not move. In this case,
turn off the power once and turn it on again.
Refer to “2.2.12 Radar system information”
Refer to “2.2.13 Display inside the PPI”
Refer to “2.2.8 Other Common
Area”
Refer to “2.2.7 Alert
notification area”
Refer to “2.2.6 Toolbar”
Refer to “2.2.2 Key assignment
indication area”
Refer to “2.2.3 Own ship
information”
Refer to “2.3 Common
Information Window”
Refer to “2.2.5 Right
toolbar”
Refer to “2.2.1 [Menu]
button”
Refer to “2.2.9 Navigation
tools”
Refer to “2.2.4 Other
ship information”
Refer to “2.2.11 Radar
signal information”
Refer to “2.2.10 Range
and mode information”
Refer to “2.2.12 Radar system
information”