JRC JMR-5425-9X - Page 376

Section 13 Setting up the Operation Mode 13-4
Setting Item Description of Setting Setting Value
Rain
(rain/snow clutter
adjustment)
You can switch between MAN and AUTO.
MAN: Manually removes rain/snow clutters.
AUTO: Automatically removes rain/snow
clutters.
MAN / AUTO
AUTO Change H-UP
Set whether the PPI bearing mode is to be
changed when the observation scene is
changed.
On: The bearing mode is changed to H-UP
automatically when the observation scene is
changed.
Off: The bearing mode is not changed even if the
observation scene is changed.
On: Select
Off: Clear
Page 2
Setting Item Description of Setting
Setting value (by antenna)
10 kW 25 kW 30 kW
Solid
state
0.75 (0.75 to 1.5) NM
Select a pulse width of 0.75 NM
range.
SP1
MP1
SP1
MP1
SP1
MP1
SP1
MP1
1.5 (1.5 to 3) NM Select a pulse width of 1.5 NM range. SP1
MP1
MP2
SP1
MP1
MP2
MP3
SP1
MP1
MP2
MP3
SP1
MP1
MP2
3 (3 to 6) NM Select a pulse width of 3 NM range. SP1
MP1
MP2
LP1
SP1
MP1
MP2
MP3
LP1
MP1
MP2
MP3
LP1
SP1
MP1
MP2
LP1
LP2
6 (6 to 12) NM Select a pulse width of 6 NM range. SP1
MP1
MP2
LP1
LP2
SP1
MP1
MP2
MP3
LP1
LP2
MP1
MP2
MP3
LP1
LP2
MP1
MP2
LP1
LP2
12 (12 to 16) NM Select a pulse width of 12 NM range. SP1
MP1
MP2
LP1
LP2
SP1
MP1
MP2
MP3
LP1
LP2
MP1
MP2
MP3
LP1
LP2
MP2
LP1
LP2
16 (16 to 22)NM Select a pulse width of 16 NM range. MP1
MP2
LP1
LP2
MP1
MP2
MP3
LP1
LP2
MP1
MP2
MP3
LP1
LP2
LP1
LP2