Section 3 Common Basic Operations 3-10
3.6 Operation of the Information Monitor
Window
This section describes the operation and editing of the information monitor window.
For the details of the information monitor window, refer to "2.3 Common Information Window".
3.6.1 Opening the information monitor window
1 Click on the page switching button on the initial display window.
In the initial display, a blank window appears.
The [Page Selection] dialogue box appears by clicking on the page switching button .
2 Click on the monitor information to be displayed. The applicable window is opened.
Returning to the [Page Selection] dialogue box from each window
When the page switching button on each window is clicked on, control returns to the [Page
Selection] dialogue box.
3.6.2 Displaying an information monitor window
from other than the [Page Selection] dialogue
box
Use the following procedures to display an information monitor window from a display other than the
[Page Selection] dialogue box.
Information monitor
window
Display method
Target INFO 1) Click on the TT symbol. (Cursor AUTO mode)
2) Right-click on the TT/AIS symbol and select [Readout information]
from the context menu.
3) Click on the AIS Activate target. (Cursor AUTO mode)
TT List 1) Select TT/AIS List from [TT/AIS] on the menu.
AIS List 1) Select TT/AIS List from [TT/AIS] on the menu.
AIS Detail INFO
1) Select one AIS target from the AIS List and click on the Details
button.
2) Right-click on the AIS symbol, and select [Readout detail
information] from the context menu.
To Next Page
Loading...
