JRC JMR-5472-S - Displaying the TT;AIS Target List; TT List

Section 6 Target Tracking and AIS 6-56
6.14 Displaying the TT/AIS Target List
The information of targets being monitored with the TT and AIS functions can be displayed in a list on
the information monitoring window.
[Operation procedure]
Open the TT/AIS list by performing the following menu operations.
[Menu] button → TT/AIS → TT/AIS List
6.14.1 TT list
Take the following steps to display the TT list and AIS list.
When the [TT List] button is clicked on, TT information is displayed.
For the TT list, a standard window and an extended window can be switched alternately.
To switch to an extended window, click on the List extension button.
To switch to a standard window, click on the List Standard button.
The following items are displayed in the TT list.
Item
Description
ID
ID No. of tracked target
CPA
Closest approach distance
TCPA
Time up to closest approach distance
BCR
Bow crossing distance
BCT
Bow crossing time
COG or CTW
COG: Course Over the Ground or CTW: Course Through the Water bearing
*In ground mode, COG is displayed. In water mode, CTW is displayed.
SOG or STW
SOG: Speed Over the Ground or STW: Speed Through the Water
*In ground mode, SOG is displayed. In water mode, STW is displayed.
BRG True bearing from target own ship
*Displayed when [BRG/RNG] is selected.
RNG Range from target own ship
*Displayed when [BRG/RNG] is selected.
LAT Target latitude
*Displayed when [LAT/LON] is selected.
*Not displayed on the standard window.
LON Target longitude
*Displayed when [LAT/LON] is selected.
*Not displayed on the standard window.
Status Status
Acquiring / Tracking / Lost
*Not displayed on the standard window.
List standard
button
List extension button