Section 13 Setting up the Operation Mode 13-30
13.22 Setting Colours and Brightness
Set the colours and brightness of the display contents.
[Operation procedure]
Open the colour and brightness setting screen by performing the following menu operations.
[Menu] button
→ Settings → Colour and Brightness
Setting Item Description of Setting Setting Value
Day / Night Set up the colour of the dialogue box itself. Day1 / Day2 / Day3 /
Dusk / Night
[Def.] button Reset all the setting items of the mode that is
selected from the [Day/Night] combo box to the
default values.
-
[Display Colour] tab
Set the colours of the display contents.
Setting Item Description of Setting Setting Value
Outer PPI Set up the colour outside the PPI.
The label changes depending on the screen to
be called.
Dark / Black
Inner PPI Set up the colour inside the PPI.
This item can be set in radar mode only.
Blue / Dark Blue /
Character Set up the text colour. White / Green / Gold /
RADAR Video Set up the colour of radar video.
Yellow / Green /
Orange / Purple /
RADAR Trails(Time) Set up the colour of radar trails.
White / Blue /
Target Symbol Set up the colour of other ship’s symbol. White / Cyan /
Range Rings Set up the colour of range rings.
White / Cyan /
Own Symbol/HL/Vector
Set up the colour of own ship symbol, heading
line and vector.
White / Cyan /
EBL1/VRM1/PI
Set up the colours of EBL1, VRM1, and parallel
index lines (PI).
White / Cyan /
EBL2/VRM2 Set up the colour of EBL2 and VRM2.
White / Cyan /
Special Line Set up the colour of special lines. White / Grey / Amber
/ Magenta / Blue /
Cyan / Green / Yellow
To Next Page
Loading...
