Section 10 Creating a User Map 10-10
A drawing toolbar comprises the following tool buttons. The buttons that are assigned vary according
to the type of the object that is currently selected (Mark/Line/Text).
Tool button Function
[Type] button
Displays an icon list dialogue. (Refer to "10.5.3 Selecting an
object type".).
[Colour] button (when Mark/Text
is selected)
Select the colour of the mark/text. (Refer to "10.5.4 Selecting a
colour of an object".).
[Line] button
(when Line is selected)
Enables selection of a colour of the line that forms the object.
(Refer to "10.5.4 Selecting a colour of an object".).
[EBL/VRM] button
Switches the cursor mode of the user map creation function to
the EBL/VRM mode. (Refer to "10.5.5 Creating an object in the
EBL/VRM mode".).
[Enter POSN] ([Enter Position]
dialogue display) button
Displays the [Enter Position] dialogue (Refer to "10.5.6 Creating
an object by specifying latitude and longitude".).
10.5.3 Selecting an object type
By displaying an icon list dialogue, the type of the object ([Mark], [Line], or [Text]) for the user map can
be selected.
1 Click on the [Type] button on the drawing toolbar.
An icon list dialogue is displayed.
2 Select a type of the object (Mark/Line/Text) to be used on the user map menu of the
icon list dialogue and select an icon.
For the icons that can be selected for each object type, refer to “Appendix D.5 Icon Button List
for User Map”.
10.5.4 Selecting a colour of an object
Select a required colour from the list that is displayed.
1 Click on the [Colour] button (when selecting Mark/Text) or the [Line] button (when
selecting Line) on the drawing toolbar.
A colour list is displayed.
2 Select a required colour from the list that is displayed.
The following 10 colours are available.
To Next Page
Loading...
