JRC JMR-5472-S - Switching the Day;Night Mode

3-15 Section 3 Common Basic Operations
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1
3.8 Switching the Day/Night Mode
Change of the colour of the Day/Night button, particularly the use of the [Night]
colour, may interfere with the recognition of display information. Confirm display
information can be recognised.
The screen display colour can be switched to any of five levels according to the brightness within the
bridge. Use the following procedure for switching.
1 Click on the [Day/Night] button on the right toolbar.
Adjustment buttons are displayed based on the brightness that is currently set.
Example: Day2 is set.
2
Adjust the brightness by using the [Light] button and the [Dark] button.
Whenever the [Light] button is clicked on, the brightness increases by one level from the
current level.
When the [Dark] button is clicked on, the brightness decreases by one level from the
current level.
Relationship between the day/night mode and the screen/operation section
brightness setting value
When the day/night mode is changed, the screen/operation section brightness is set to the following
values.
26-inch monitor
19-inch monitor
Screen
brightness
Day1, Day2, Day3: 67/100
Dusk: 60/100
Night: 11/100
Day1, Day2, Day3: 70/100
Dusk: 62/100
Night: 10/100
Operation unit
brightness
Day1: Level4 / Day2: Level3 / Day3: Level2 / Dusk, Nigh: Level1
: Night
: Dusk
: Day 3
: Day 2
: Day 1