Section 3 Common Basic Operations 3-36
3.18 [MULTI] Dial
3.18.1 Functions of [MULTI] dial
By turning the [MULT] dial, the functions that are assigned to the [MULTI] dial can be operated.
Assignment to the [MULTI] dial can be changed.
3.18.2 Functions assigned to [MULTI] dial
3.18.2.1 Displaying a screen for setting the function that is
assigned
By pressing the [MULTI] dial, the setting screen for the function that is currently assigned can be
displayed.
3.18.2.2 Changing the function that is assigned
1
Press the [MULTI] dial.
The [Key Assignment] dialogue box of the assigned function is displayed.
2 Select a function to be assigned from [Multi Dial] by turning the [MULTI] dial.
The table below lists the functions that can be assigned.
Function name Function outline
Vector Time Selection of a vector length
Trails Length Selection of a radar trail length
C UP Angle Change of the course-up angle
Own Track Colour Selection of an own track colour
Mark/Line Colour Selection of a mark/line colour
Manual Tune Adjustment of manual tuning
Display Brightness Adjustment of brightness of the display panel
Panel Brightness Adjustment of brightness of the operation panel
Adjustment of sensitivity
Removal of rain and snow clutter
3 Press the [MULTI] dial.
The selected function is set to the assigned function.
Sequence number of assigned
function and the total number
Another function available
for selection
Another function available
for selection
Item on the blue button is
the function that is
function that is
To Next Page
Loading...
