JRC JMR-5472-S - Motor Replacement Procedure for NKE-2632;NKE-2632 H

15-39 Section 15 Maintenance & Inspection
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
23
24
24
26
27
15.5.3.5 Motor replacement procedure for NKE-2632/NKE-2632H
1
Remove the cover.
When replacing a motor,
ensure that the safety switch
of the radar antenna is
turned Off prior to
commencing the
replacement work.
Exercise care not to lose
bolts, screws and other parts
removed from the radar
antenna, as they will be
used again in later steps.
Both left and right side covers need
to be removed to carry out the
motor replacement work.
Remove the M8 fall-out prevention
bolts (6 positions) and remove the
cover.
M8 bolt fall
-out
prevention
(6 positions)