JRC JMR-5472-S - Creating a Mark (Mark Object); Creating an Object by Specifying the Latitude and Longitude

10-15 Section 10 Creating a User Map
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
10.6.1 Creating a mark (Mark object)
A mark can be created by specifying the creation position with the cursor.
1 Click on the [Type] button on the drawing toolbar.
An icon list dialogue is opened.
Select an icon of the mark. (Refer to "10.5.3 Selecting an object type").
2 Click on the position on which the mark is to be created by using the cursor.
The mark is displayed on the position on which the mouse button was clicked and the
parameters of the mark that was created are displayed in the object property dialogue.
3 Adjust the parameters on the object property dialogue.
4 To create an object on another position continuously, repeat Steps 2 and 3.
10.6.1.1 Creating an object by specifying the latitude and longitude
1
Click on the [Enter POSN] button on the drawing toolbar.
The [Enter Position] dialogue appears (Refer to "10.5.6 Creating an object by specifying latitude
and longitude).
2 Enter the latitude and longitude of the position on which an object is to be created and
click on the [Enter] button.
An object is created on the specified latitude and longitude and the property information is
reflected in the object property dialogue. (Refer to "10.5.8 Object property dialogue").
3 Adjust the parameters on the object property dialogue.
4 To create an object on another position continuously, repeat Steps 2 and 3.
At user map creation, the mark size can be changed by selecting [View] – [User Map].
For the details, refer to "11.1.4 Setting up the display of User Map".
Mark