Section 11 Setting up Screen View 11-8
11.1.7 Setting up the display of other ship’s track
The [Target Track] dialogue consists of the [Display], [Plot] and [Clear] tabs.
[Operation procedure]
Open the other ship’s track display setting screen by performing the following menu operations.
[Menu] button → View → Target Track
[Display] tab
On the [Display] tab, set up the display of other ship’s tracks.
The descriptions of settings are shown in the table below.
Setting Item Description of Setting Setting Value
Target Track Display Select Hide/Display of other ship’s track by
clicking on the button and set a track to be
displayed by selecting the item.
All On: Displays all the tracks of other ships.
All Off: Hides all the tracks of other ships.
Individual: Displays the selected tracks of
other ships.
All On / All Off /
Individual
When Individual is
selected:
Select from Track1/Track 2
…/Track 10/Track 11 to
Track 20/Track 21 to
File Load/Save Display the [Tools] – [File Manager] – [File
-
[Plot] tab
The edit pane of the [Plot] tab is divided into two dialogues.
The descriptions of settings are shown in the table below.
For All Target Track Select the radio button, set it to On, and
select the colour of the plot of the other ship’s
track from the combo box.
White / Grey / Amber /
Magenta / Blue / Cyan /
Green / Yellow / Orange /
Dark Red
For Individual Target
Track
Select the radio button, set it On, and select
the colour of the plot of each other ship’s
track (Track 1, Track 2, …, Track 10 and
Tracks 11 to 20, Tracks 21 to 30, … Tracks 91
to 100) from the combo box.
White / Grey / Amber /
Magenta /Blue / Cyan /
Green / Yellow/ Orange /
Dark Red
* The setting value is
common among all the
Plot Interval Select a plot interval of target tracks from the
combo box.
Off / 3 s / 5 s / 10 s / 30 s /
1 min / 3 min / 5 min /10 min
/ 30 min / 60 min / 1 NM / 3
NM / 5 NM / 10 NM / 0.1 NM
/ 0.2 NM / 0.3 NM / 0.5 NM
File Load/Save Display the [Tools] – [File Manager] – [File
-
To Next Page
Loading...
