JRC JMR-5472-S - Setting up the Display of the Past Position; Setting up the Display of User Map

11-5 Section 11 Setting up Screen View
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録
11.1.3 Setting up the display of the past position
Set the display of the past position.
[Operation procedure]
Open the past position display setting screen by performing the following operations.
[Menu] button → View → Past Position
Setting Item Description of Setting Setting Value
Past Position Select an interval of the past position.
When Off is selected, the past position is not
displayed.
Off / 0.5 min / 1 min / 2 min /
4 min / 0.1 NM / 0.2 NM /
0.5 NM / 1 NM
11.1.4 Setting up the display of user map
Set up the display of User Map.
[Operation procedure]
[Menu] button → View → User Map
The descriptions of settings are shown in the table below.
Setting Item Description of Setting Setting Value
Object Type Click on the button to specify whether to
display or hide the object mark, and select the
mark to be displayed.
All On: Displays all marks.
Individual: Displays selected marks.
All On / Individual
Types of selectable marks
Mark: Refer to Appendix
D.5 “Icon Button List for
User Map”.
Line: Solid Line, Dotted
Line, Dashed Line
Text: Text
Mark/Line Colour Display/Hide the colour for Mark/Line. Select
the colour to be set.
Display: Select
Hide: Clear
White / Grey / Amber /
Magenta / Blue / Cyan /
Green / Yellow / Orange /
Dark Red
Mark Size Set the mark display size. 1 (Minimum) /2/3/4/5
(Maximum)
Comment Font Size
Set the font size of the comment.
Standard / Small