Section 10 Creating a User Map 10-22
10.6.3.4 Editing a template
By registering a frequently used text as a template, the template can be used at text creation.
1 Click on the [Edit Template] button.
The [Template] dialogue appears.
2 Click on a text input area.
A character input full keyboard is displayed.
3 Create a text.
For the method of using the character input full keyboard, refer to "3.19.2 Name and function of
each section of the keyboard".
4 Close the character input full keyboard by clicking on the [Enter] key.
5 Click on the [Register] button.
6 Close the [Template] dialogue and click on [
] on the right side of the text input area
of the object properties dialogue.
[Template List] is displayed.
7 Select any template.
8 To delete unnecessary templates, select unnecessary templates in the [Template List]
and click on the [Delete] button.
10.6.3.5 Changing a text angle
Under the factory setting, a text is oriented horizontally. The text can be angled or inverted according to
the text creation position.
1 Click on the [Angle] input box.
A numeric value input keyboard is displayed.
2 Enter an angle.
Specify an angle in clockwise based on the direction of the 12 O'clock as 0°. Under the factory
setting, the angle is set to 90° (horizontal).
For the method of using the numeric value input keyboard, refer to "3.19.2 Name and function
of each section of the keyboard
".
To Next Page
Loading...
