Section 13 Setting up the Operation Mode 13-20
13.14 Setting NAVTEX
Set the display method of the NAVTEX message that is displayed when the [NAVTEX] button of the
information reference window is clicked on.
[Operation procedure]
[Menu] button → Settings → NAVTEX
The following table shows the setting items.
Setting Item Description of Setting Setting Value
Show NAVTEX Enable/disable the display of the NAVTEX mark. To enable: Select.
To disable: Clear.
Navigation Alarm Set highlighted display of navigation alarm.
When this item is enabled, the alarm message is
displayed in black characters on the yellow
background.
To enable: Select.
To disable: Clear.
Weather Alarm Set highlighted display of weather alarm.
When this item is enabled, the alarm message is
displayed in black characters on the yellow
background.
To enable: Select.
To disable: Clear.
Ice Warning Set highlighted display of ice warning.
When this item is enabled, the alarm message is
displayed in black characters on the yellow
background.
To enable: Select.
To disable: Clear.
Search and Rescue
Information
Set highlighted display of search and rescue
information.
When this item is enabled, the information is
displayed in black characters on the yellow
background.
To enable: Select.
To disable: Clear.
Extended Navigational
Information
Set highlighted display of supplementary
information of navigation warning.
When this item is enabled, the information is
displayed in black characters on the yellow
background.
To enable: Select.
To disable: Clear.
[Display Filtering for
NAVTEX Messages]
button
When this button is clicked on, the [Display
Filtering for NAVTEX Messages] dialogue is
opened.
For details, refer to “Displaying only the NAVTEX
messages that satisfy a specific condition”.
-
To Next Page
Loading...
