Section 3 Common Basic Operations 3-42
3.22 Password Input
Equipment settings are protected by a password. To open the dialogue box of the protected setting
function, the password input is necessary.
[Operation procedure]
Perform the following menu operation to open the password input screen.
[Menu] button → Code Input
1 Enter "0" (zero) and click on the [Enter] key.
2 Display the menu by clicking again on the [Menu] button, and change over to the
second page using the page switching button.
The [Service] button is displayed in the menu.
3 Click on the [Service] button.
Check that service-related menus are displayed in the sub-menu.
Subsequently, service-related menus can be set.
To Next Page
Loading...
