Section 3 Common Basic Operations 3-54
2 Click the [VHF Call] menu on the context menu.
The [VHF Call] dialog is displayed.
3 Click the [CALL] button on [VHF Call].
Selected VHF Radiotelephone (JHS-800S) will start DSC call.
When calling the individual station, the communication can be started by the wireless
speaker microphone after received the acknowledgement.
In the example case above, the DSC call including ADDRESS(MMSI) as 234567890 and the
communication channel as CH67 is sent to the vessel. Additionally, "CALL TYPE" and
"WORK CH" can be changed if needed.
*It is not possible to operate the [VHF Call] window on the radar screen during operation of
the JHS-800S.
*When inputting (6) [WORK CH] selector, (12) Own ship’s MMSI Code and (13) [ADDRESS]
input, key input from the operation unit is impossible.
While the JHS-800S is operated or when the call of the JHS-800S ends, the following popup
window is displayed.
(a) During operation of the JHS-800S (b) When the call is finished
To Next Page
Loading...
