JRC JMR-5472-S - Page 530

Section 18 Specifications 18-20
Receivable signals (i)
Ship heading
THS > HDT (over 40Hz)
Course
GGA > RMC > RMA > GNS > GLL
Geodetic positioning system
DTM
Date information
ZDA
COG/SOG
RMC > RMA > VTG
Ship speed through water
VBW > VHW
Turning speed
ROT
Water depth
DPT > DBS > DBK> DBT
Wind direction/wind speed
MWV > MWD
Air temperature
MTA > MDA
Water temperature
MTW > MDA
Atmospheric pressure
MMB > MDA
Humidity
MHU > MDA
AIS
VDM, VDO
Alert
ACK, ALR, ACN, ALF
NAVTEX
NRX or JRC format
Azimuth/distance to the destination
RMB > BWC > BWR (Plotter option)
Water current
CUR
Transmittable signals
RADAR system data
RSD*1
Own ship data
OSD*2
Watch Timer Reset
EVE*3
TT data
TTM, TLL, TTD, TLB
AIS target data
TTM, TLL, TTD
AIS remote control data
VSD, AIR, AIQ, ABM, BBM
Remote maintenance data
JRC format
Alert
ACK, ALR, ACN, ALC, ALF, ARC, HBT
NAVTEX
NRM
Azimuth/distance to the destination
BWC, RMB
Navigation Data DBK, DPT, DTM, GGA, GLL, HDG, HDT, MDA, MWV, NSR, POS,
RMC, ROT, RSA, THS, VBW, VDR, VTG, VWR, VWT, XDR, ZDA,
BWC, RTE, WPL, APB, BOD, OSD, RSD, XTE, ZTG
Visual range
Visual range
1.0m from the centre of display
i. The Speed measuring accuracy of speed sensor shall confirm to IMO Resolution MSC.96(72).
The measuring accuracy of GPS shall confirm to IMO Resolution MSC.112(73).
*1 The output range unit is fixed to Nautical Mile.
*2 The output speed unit is fixed to Knot.
*3 When the value exceeds the set value, a message is output indicating a non-operation state. The value is set at
installation.