JRC JMR-5472-S - Page 568

Appendix C Setting the Inter switch C-10
2) Setting of SW12 (Radar connection setting)
3) Setting of SW13 (Not used)
Memo
When setting the dip switches of the Inter switch circuit, turn OFF the main power supply of the
Inter switch, and ensure safety before carrying out the setting.
1, 2, 3 and 4
Not used (all OFF)
Radar connection setting
1
ON
Display unit No.1 connection present
OFF
Display unit No.1 connection not present
2
ON
Radar antenna No.1 connection present
OFF
Radar antenna No.1 connection not present
3
ON
Display unit No.2 connection present
OFF
Display unit No.2 connection not present
4
ON
Radar antenna No.2 connection present
OFF
Radar antenna No.2 connection not present
5
ON
Display unit No.3 connection present
OFF
Display unit No.3 connection not present
6
ON
Radar antenna No.3 connection present
OFF
Radar antenna No.3 connection not present
7
ON
Display unit No.4 connection present
OFF
Display unit No.4 connection not present
8
ON
Radar antenna No.4 connection present
OFF
Radar antenna No.4 connection not present