JRC NCR-333 - 6.3 MAIN MENU

I a. Print the massage
Print the message
The currently open message can be printed when
having connected the
external printer.
Procedures
1) Press the 8 key. The sub screen appears.
2)
Select the •[PRINT oun", and press the lEN] key.
3) •ARE YOU SURE?B is displayed. Select the "[OK]",
and press the IENlj key. (•NOW PRINTING .. ." is
displayed on the sub screen.)
To return to the sub screen (SET UP), select
•[CANCEL]"
and press the lEN] key.
4) After message prin~has been completed, press
the
lEN] key or the 1£b.B1 key.
[Notes 1
-To stop printing, press the~ key while printing.
KEIHIN KO. TOKYO EAST PASSAGE.
DAYTIME DAILY UNTIL 08 JULY 2006
SET UP *
[NEXT MSG]
[PREV. MSG]
[SAVE MSG]
[PRINT OUT]
ARE YOU SURE?
[CANCEL]
PRINT OUT*
PRINT OUT OK
[CANCEL]
- R[PRINT oun" cannot be selected when "DATA OUTR of "PRINTER PROPERTr has set up "OFFR.
Refer to "6.3.4.5 External printer settingsB.
The message cannot be printed
When printing is unable, the sub screen is displayed as
shown
in the following figure.
In this case, check the followings;
- The connection between the external printer
and NCR-333.
-
•PRINTER PROPERTYw settings. (Refer
to "6.3.4.5
External printer settings")
-Confirm the
external printer. (Paper out, etc ... )
KEIHIN KO. TOKYO EAST PASSAGE.
DAYTIME DAILY UNTIL 08 JULY 2006
*
PLEASE CHECK THE
" PRINTER
PROPERTY "
SETTING.
•
6-11