I f. Output the message from an external port
The data
of
currently opened message text can be
output to the connected the
external equipment (ECDIS,
etc).
Procedures
1)
Press the 8
key.
The sub screen appears.
2)
Select the ·[DATAOUTr, and press the
lEN]
key.
3) Select the port which outputs message data.
- SEL-DATA
OUT:
The message data is outputted
from a "DATA
OUr
port.
- SEL- DISP
OUT:
The message data is outputted
from a
"DISP" port.
4)
•ARE YOU
SURE?~
is displayed. Select the "[OK]",
and press the
IEN1j
key. ("NOW OUTPUTTING
...
~
is
displayed on the sub screen.)
To
return to the sub screen (SET UP), select
•[CANCEL]"
and press the
IEN1j
key.
5) After
mera~e
outputtin,9.._.!!,as
been completed,
press the
EN
key or the
19:B1
key.
-To
stop outputting, press the
ICLRj
key while outputting.
6-12
JULY
2006
[SEL
-ECD
IS
OUT]
[SEL
-D
I
SP
OUT]
[CANCEL]
DATA
OUT*
ARE
YOU
SURE?
[CANCEL]
DATA OUT OK
[CANCEL]
To Next Page
Loading...
