EasyManua.ls Logo

JRC NCR-333 - 6.3.3.3 Buzzer settings (BUZZER)

JRC NCR-333
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
I
f.
Print
messages
or
the
Information
on
equipment
Print
one
message
The selected message can be printed.
Procedures
1) Move cursor onto the message to print.
2) Press the 8 key. The sub screen appears.
3)
Select the •PRINT MENU", and the IENlj key.
4) Select the •[SELECT MSG]" in the sub screen
of
•PRINT MENU".
-Select
an item in the same procedure as
·e.
Print the
message-
3)" (p.6-11) after the above procedure.
Print
messages
at
the
same
time
The messages which are put the check mark can be
printed
at
the same time.
Procedures
1) Continued from Procedure
5)
of
"c. Put a check
markR.
(The sub screen is displayed.)
2) Select the •PRINT MENU", and the IENlj key.
3) Select the
·[cHECK
MsGr,
and the
lEN]
key.
To
clear to all check marks, select "[RESET CHECK]"
and press the
lEN]
key.
(Notes l
- Select an item in the
same
procedure
as
"e. Print the
message-
3)" (p.6-11) after the above procedure.
[SELECT
MSG]
[CHECK MSG]
[LIST]
[STATUS]
BATCH
PRINT
To display to previous screen,
select "[CANCEL]".
6-19

Table of Contents

Other manuals for JRC NCR-333

Related product manuals