Print the lnfonnatlon on equipment
The list
of
stored messages and the setting status can be printed.
Procedures
1)
Press the 8
key.
The sub screen appears.
2)
Select the ·PRINT MENU", and press the
lEN]
key.
3) Select the
·[LISTr
or
"[STATusr.
and press the
IENTj
key.
[usn:
The list
of
stored messages is printed.
PRINT
MENU*
[SELECT
MSG]
[CHECK
MSG]
11!~1•1
[STATUS]
BATCH
PRINT
[STATUS]: The setting status
is
printed. The contents
of
"6.3.5.3 Setting status
of
the NAVTEX
receiver'' are printed.
4) Printing starts. After printing is
completed, close the sub screen.
Print massages
at
the same time
The stored messages can be printed at the same time according to
type, station and
channel.
Procedures
1)
Press the 8
key.
The sub screen appears.
2)
Select the ·PRINT MENU", and the
IENTj
key.
3) Select the ·sATCH PRINT", and press the
IENTj
key.
The sub screen
of
"BATCH PRINT
MENu·
appears.
4)
Select the following message type for printing.
The
"SELECT MSG" can select the message printing by the
receiving
channel, receiving station, message type.
[ALL
STORED MSG]: All stored messages are printed.
[ALL
SAVE MSG]: All saved messages are printed.
SELECT MSG: The messages
of
the conditions
PRINT
MENU*
[SELECT
MSG]
[CHECK
MSG]
[LIST]
[STATUS]
*BATCH
PRINT
MENU*
lt;'11a-J(tli~3•Wcf'."iCJI
[ALL
SAVE
MSG]
*BATCH
PRINT
MENU*
A--
SELECT
MSG
--
ttJ:rJm!31:
4209.
5
STATION:A
MSG
TYP:L
selected from the following three items are printed.
-CHANNEL:
-STATION:
-MSGTYP:
The receiving channel is selected from '518kHz', '490kHz', '4209.5kHz' or 'ALL'.
The receiving station is
selected from 'A' to 'Z', or 'ALL'.
The message type is
selected from 'A' to 'Z',
or
'ALL'.
5)
To
start printing, select item and press the
IENTj
key.
•ARE YOU SURE?• is displayed on the sub screen, if the
IENTj
key is pressed after selecting "[ALL
STORED MSG]"
or
•[ALL SAVE
MSGr.
When
in
·sELECT
MSG", ·ARE YOU SURE?" is displayed
on
the sub screen,
if
the
IENTj
key is pressed
after
selecting "MSG
rvp•.
[Notes
1
6-20
-Select
an item
in
the same procedure as "e. Print the message-
ar
(p.6-11) after the above
procedure.
To Next Page
Loading...
