I g. Output massages from an external port
Output one message
The external serial port outputs the selected message's
data from DATA
OUT port.
Procedures
1) Move cursor to the message
to
output.
2) Press the
8
key.
The sub screen appears.
3)
Select the
MPORT
MENu·.
and the IENlj
key.
4) Select the "[SEL-DATA
oun·
or
"[SEL-DISP
oun"
in
the sub screen
of
"PORT MENU".
-Select
an item
in
the same procedure as "f. Output the message from an external
port-
3)" (p.6-12)
after the above procedure.
Output messages at the same time
The messages with the check mark can be output
at
the
same time.
Procedures
1) Continued from Procedure
5)
of
"c. Put a check
mark.R.
(The sub screen is displayed.)
2) Select the
MPORT
MENu·,
and the IENlj
key.
3) Select
re
TfCHK-DATA
oun·
or
"CHK-DISP OUT",
and the EN
key.
To
clear to all check marks, select "[RESET CHECK]"
and press the
~
key.
- CHK-DATA
OUT:
Message data outgoing from
ECDIS
or
INS port.
-
CHK-DISP
OUT:
Message data outgoing from DISP port.
(Notes I
-Select
an item in the same procedure as
Mf.
Output the message from an external
port-
3)" (p.6-12)
after the above procedure.
6-21
To Next Page
Loading...
