JUKI IP-420 - Start Sewing

– 33 –
3
Start sewing.
Start sewing referring to
"
!
-5-1. Sewing" p.23
.
* For the screen, refer to
"
@
-2-4. LCD display section at
the time of sewing shape selection" p.34
.
1. When using the exclusive presser, conrm the pattern shape for safety's sake. Should
the pattern protrude from the feeding frame, needle interferes with the feeding frame
during sewing, and there is a danger of needle breakage or the like.
2. When the presser is going up, be careful that your ngers are caught with the presser
since the presser moves after coming down.
3. When turning OFF the power without pressing READY key , the set value of "Pat-
tern No.", "X enlargement/reduction ratio", "Y enlargement/reduction ratio", "Max. sew-
ing speed", "Thread tension" or "Intermediate presser height" is not stored in memory.