5. Slide the transceiver in gently until it is fully seated. See Figure 44 on page 129 for an example of inserting
an SFP transceiver. Figure 45 on page 129, and Figure 46 on page 130 are examples of inserting QSFP+
transceivers into different ACX5000 router product SKU devices.
6. Remove the rubber safety cap when you are ready to connect the cable to the transceiver.
WARNING: Do not look directly into a fiber-optic transceiver or into the ends of
fiber-optic cables. Fiber-optic transceivers and fiber-optic cables connected to
transceivers emit laser light that can damage your eyes.
Figure 44: Installing an SFP Transceiver
Figure 45: Installing a QSFP+ Transceiver—Vertical Orientation
129
To Next Page
Loading...
