JVC GY-DV700W User Manual

E-75
12. SETUP MENU
E-74
12. SETUP MENU
Item Function, Operation Variation Range Initial Setting
COLOR
MATRIX
GAMMA
SKIN COLOR
ADJUST
PAGE BACK
Sets the colour matrix
OFF ...... Deactivates the colour matrix function
ON ....... The colour reproducibility is enhanced, but noise increases.
During the LOLUX operation, COLOR MATRIX is fixed to the OFF
setting and "FIX" is displayed.
Correction of the gamma curve to decide the reproducibility of black color.
• To enhance the black colour reproducibility. However, halftones will be
lost for white section
............... Increase the number
• When reproducibility of the black colour is not so important
............... Decrease the number
• During LOLUX operation, "FIX" is displayed because GAMMA is fixed
at the MIN value.
Pressing the SHUTTER dial once when the cursor is at this position
switches the screen to display the SKIN COLOR ADJUST screen.
The PROCESS MENU returns when the SHUTTER dial is pressed with
the cursor at this position.
ON
OFF
MAX (8)
7
17
gradations
to
NORMAL (0)
to
-7
MIN (-8)
–
ON
MAX (WEK)
NORMAL (WE)
–
Item Function, Operation Variation Range Initial Setting
SKIN
COLOUR
DETECT
SKIN COLOR
RANGE
PAGE BACK
Sets whether it is possible to change the colour used by the Skin Detail
function.
EXECUTE ...... Choose this setting to allow detection of the colour used
by the Skin Detail function.
STOP ............. Choose this setting to stop detection of the colour used
by the Skin Detail function.
☞ See "Using the Skin Detail Function" on page 84.
The setting of this item can only be changed when the SKIN COLOR
DETECT item is set to EXECUTE.
This setting is for adjusting the skin colour range where Skin Detail
functions. (When this item is selected, the area where the Skin Detail
function is applicable is indicated by zebra patterns on the screen.)
While viewing the zebra pattern range, perform the adjustment.
Increasing the range ........ Increase the number
Increasing the range . ...... Decrease the number
The ADVANCED PROCESS MENU returns when the SHUTTER dial is
pressed with the cursor at this position.
STOP
EXECUTE
WIDE
+19
(33 gradations)
to
NORMAL
to
-11
NARROW
–
STOP
NORMAL
–
12-8 SKIN COLOUR ADJUST Screen
12-7 ADVANCED PROCESS Screen12-6 PROCESS Screen
MASTER
BLACK
DETAIL
DTL. V/H
BAL
DTL.
FREQUENCY
SKIN DTL
DETECT
V.
RESOLUTION
ADVANCED
PROCESS
PAGE BACK
Item Function, Operation Variation Range Initial Setting
Adjusts the pedestal level (master black), which is the reference of black.
• To increase the pedestal level ...... Increase the number. (UP)
• To decrease the pedestal level .... Decrease the number. (DOWN)
Adjusts the detail enhancement level.
• To sharpen details ....................... Increase the number. (UP)
• To soften details ........................... Decrease the number. (DOWN)
Sets the direction, horizontal (H) or vertical (V), in which stronger detail
enhancement is applied.
To strengthen the H enhancement ... ..Increase the number (UP).
To strengthen the V enhancement ... .. Decrease the number (DOWN).
While the LOLUX function is operating, the setting value is fixed at
NORMAL and “FIX” is displayed.
Varies the detail enhancement level by changing the detail enhancement
frequency. Set in accordance with the subject
HIGH ............. Applies strong detail enhancement.
Used to shoot subjects with fine patterns.
MIDDLE ........ Applies medium detail enhancement.
LOW .............. Applies weak detail enhancement.
Used to shoot subjects with large patterns.
While the LOLUX function is operating, the setting value is fixed at
MIDDLE and “FIX” is displayed.
Sets the Skin Detail function to ON or OFF.
ON ................ Skin Detail function activated.
OFF ............... Skin Detail function not activated.
☞ See "Using the Skin Detail Function" on page 84.
Increases the vertical resolution.
• NORMAL .... Vertical resolution 380 lines.
• V.MAX ......... Vertical resolution 450 lines
(The sensitivity is degraded and the bright sections may be colored
depending on the subject.)
Displays the ADVANCED PROCESS Screen.
☞ See "ADVANCED PROCESS Screen" on page 75.
The CAMERA MENU returns when the SHUTTER dial is pressed with
the cursor at this position.
MAX (100)
99 201
gradations
to
NORMAL (0)
to
-99
MIN (-100)
MAX (9)
816
gradations
to
NORMAL (0)
to
-5
MIN (-6)
H-MAX (4)
39
gradations
to
NORMAL (0)
to
-3
H-MIN (-4)
HIGH
MIDDLE
LOW
ON
OFF
NORMAL
V.MAX
–
NORMAL
NORMAL
NORMAL
HIGH
OFF
NORMAL
–
Note:
Note:
CAUTION:
CAUTION:
For servicing
See the service manual page 1-16, “1.12 CHANGING
THE COLOR MATRIX SETTING”.
→

JVC GY-DV700W Specifications

General

Brand	JVC
Model	GY-DV700W
Category	Camcorder
Language	English