E-77
12. SETUP MENU
E-76
12. SETUP MENU
12-10 SETUP Screen
Item Function, Operation Variation Range Initial Setting
H PHASE
SC PHASE
CAM MIC +48V
PAGE BACK
For adjusting the horizontal phase of the unit in relation to the signal
(external sync signal) input through the SYNC IN connector on the left
side of the unit.
Delaying the horizontal phase of the unit in relation to the external sync
signal .
................... Increase the number
Speeding up the horizontal phase of the unit in relation to the external
sync signal .
................... Decrease the number
∗ Adjustment is not possible if the external sync signal is not input. Possible
values are indicated by ∗∗∗.
For adjusting the sub-carrier (SC) of the unit in relation to the signal
(external sync signal) input through the SYNC IN connector on the left
side of the unit.
Rotating the sub-carrier clockwise in relation to the external sync signal
................... Increase the number
Rotating the sub-carrier anticlockwise in relation to the external sync signal
................... Decrease the number
∗ Adjustment is not possible if the external sync signal is not input. Possible
values are indicated by ∗∗∗.
The phase will change when the power is turned on/off. The SC phase
must be adjusted each time the power is turned on.
To set whether or not 48V voltage should be applied to the MIC IN connector
on the front section.
ON ............. 48V applied.
OFF ............ 48V not applied.
The CAMERA MENU returns when the SHUTTER dial is pressed with
the cursor at this position.
0
to
256
0
to
256
ON
OFF
–
128
128
ON
–
Storage Operation
1.
Press the STATUS button for about 1 second to display the
CAMERA MENU screen.
2.
Turn the SHUTTER dial to align the cursor with the FILE
MANAGE item, and then press the SHUTTER dial in the
direction of the arrow.
• The FILE MANAGE screen appears in the viewfinder.
3.
Choose the file to save in (A or B).
1 Turn the SHUTTER dial to align the cursor with the
STORE FILE item, and then press the SHUTTER dial
in the direction of the arrow.
2 Turn the SHUTTER dial to select the file to save in (A or
B), and then press the SHUTTER dial in the direction of
the arrow.
4.
Save the menu settings.
Turn the SHUTTER dial to align the cursor with the STORE
item, and then press the SHUTTER dial in the direction of
the arrow.
• The “STORE OK?” message appears in the lower section
of the centre of the screen.
When the SHUTTER dial is pressed in the direction of
the arrow once more, the menu settings are stored in
the selected STORE FILE.
5.
Close the FILE MANAGE screen
Turn the SHUTTER dial to align the cursor with PAGE BACK,
and then press the SHUTTER dial in the direction of the
arrow.
• The CAMERA MENU screen returns in the viewfinder.
Resetting the menu settings to the initial settings is also
done using the FILE MANAGE screen.
☞ See "Resetting the Camera Menu Settings" on page 78.
12-9 FILE MANAGE Screen
The unit has three files that can be used for storing camera menus. The FILE MANAGE screen is for performing the operations for
saving the set CAMERA MENU.
• When menu settings are made using SCENE FILE A or B, the contents of the settings will be invalid if the storage operations
are not performed on this screen. However, the SETUP MENU settings will be valid even if the storage operations are not
performed.
• When menu settings are made using SCENE FILE OFF, the contents are stored in the unit at the time settings are changed
on each menu screen even if the storage operations are not performed.
SHUTTER
MENU
Cursor
--- - - CAMERA MENU -
SCENE F I LE : A
VF D I SPLAY MENU
OPER A T I ON MENU
PROCESS MENU
FILE MANAGE
SETUP MENU
EX I T
CAMERA MENU screen
..
.
..
..
..
.
--- FILE MANAGE ---
SCENE F I LE A
STORE F I LE : A
:OFF
STORE
RESET F I LE
RESET
STORE OK?
PAGE BACK
Cursor
FILE MANAGE screen
LIGHT
ON
OFF
COUNTER
CTL
TC
UB
RESET
OPERATE/WARNING
MONITOR
SELECT
STATUSSHUTTER
MENU
FILTER
1 3200k
2 5600k+1/8ND
3 5600k
4 5600k+1/64ND
POWER
NG
GAIN
OUTPUT
WHT.BAL
VTR
ON OFF
ALARM
MONITOR
S
A
V
E
S
T
B
Y
H M
L
B
A
R
S
C
A
M
A
U
T
O
K
N
E
E
P
R
S
T
A
B
O
N
O
F
F
CH-1
CH-2
AUDIO
LEVEL
AUTO IRIS LOLUX
BACK L
NORMAL
SPOT L
STRETCH
NORMAL
COMPRESS
FULL AUTO BLACK
C
1. STATUS button
SHUTTER dial
2. 3. 4. 5.
• When changing the menu settings in SCENE FILE A
and saving in STORE FILE B:
SCENE FILE B: The contents become the menu
contents of the changed settings.
SCENE FILE A: The contents become the menu
contents valid before the settings were changed.
• When changing the menu settings in SCENE FILE OFF
and saving in STORE FILE B:
SCENE FILE B: The contents become the menu
contents of the changed settings.
SCENE FILE OFF: The contents become the menu
contents of the changed settings.
Memo:
To Next Page
Loading...
Need help?
General
