JVC XL-R5010BKC User Manual

10
English
English
Power STANDBY/ON Operations
To turn power to the unit on
Press the STANDBY/ON button on the front panel or remote
control.
• The currently selected CD function is shown in the information
display.
To put the unit in standby mode during operation
Press the STANDBY/ON button on the front panel or remote
control.
• The clock display is shown in the information display. It flashes
if the clock has not been set.
• The unit can be put into the standby mode by pressing the
STANDBY/ON button.
If the STANDBY/ON button is pressed during a recording
operation, the standby lamp flashes while the unit brings the opera-
tion to an end. Once the operation has stopped, the unit enters the
standby mode and the standby lamp lights steady. From the time
the button is pressed until the standby lamp lights steady, the unit
will not respond to any button pressed on the front panel of the
main unit or remote control.
Turning the power on by pressing a function
button when the unit is in the standby mode
The unit can be turned on and a function selected simply by press-
ing one of the buttons shown in the figure below
• When the PLAY 3 button for either the 3-CD changer or CDR
is pressed on the main unit, the power is turned on and the cor-
responding tray is selected. If a disc is loaded in the selected
tray, playback begins.
• When one of the 3-CD changer EJECT 0 buttons or the CDR
EJECT 0 button is pressed, the power is turned on and the tray
opens, but the currently selected function (3-CD changer or
CDR) does not change.
• When the 3 (play) button on the remote control is pressed, the
power is turned on, the last selected function (3-CD changer or
CDR) is recalled and the corresponding tray is selected. If a disc
is loaded in the selected tray, playback begins.
• If the power cord is unplugged from the wall socket for more
than a few seconds, the internal clock, program, etc. of the main
unit may require resetting. When this occurs, please set the
clock (and timer functions) again.
Turning the Power On and
Standby Mode
STANDBY
STANDBY/ON
PLAY & EXCHANGE
3
-
CD
MAXMIN
PHONES
PLAY MODE
PHONES LEVEL
EJECT
REC SOURCE SELECTOR
MIX BLANCE
CD
LINE
LINE
MIC
MULTI JOG
REC LEVEL
+
–
MIC
CANCELSETMENU
PAUSE
REC/
REC MUTING
PLAYSTOP
SYNCHRO
CD EDIT CD REC
STOP PLAY PAUSE
FINALIZE
MICLINECDDIGITAL
STANDBY/ON
CD1 CD2 CD3
CD REC
PLAY
MODE
•
REC
REC MUTING
REC
SOURCE
MENU
PITCH
0
C
H
A
N
C
E
L
REPEAT CD
PITCH
+
SET
PITCH–
RM
–
SXLR5010A REMOTE CONTROL
CDR
CD EDIT FINALIZE DISPLAY
1 2
4 5
7 8
3
6
9
10
+
10
FAD E SYNCHRO
CONTROL
CD1, CD2, CD3
STANDBY/ON
()
STANDBY/ON ( )
CD1, CD2, CD3
3
33
0
0
STANDBY/ON
Lamp goes out.
Main Unit
Remote Control
STANDBY
STANDBY/ON
Lamp lights
Main Unit
Remote Control
STANDBY/ON
STANDBY
STANDBY/ON
Function Operation
Main unit
Remote control
3-CD
changer
The function is set to 3-CD
changer. The CD PLAYER
indictor is shown in the dis-
play window.
If one of these buttons is
pressed when a CD is in the
corresponding CD tray, contin-
uous play starts from the CD
tray corresponding to the but-
ton pressed.
These buttons do not function
during program and random
play modes.
Main unit
(3-CD control)
3-CD
changer
The function is set to 3-CD
changer. The CD PLAYER
indicator is shown in the dis-
play window.
Main unit
(CDR control)
CDR
The function is set to CDR.
The CD RECORDER indica-
tor is shown in the display
window.
CD1 CD2 CD3
XL-R5010BK.book Page 10 Monday, June 4, 2001 11:40 AM

JVC XL-R5010BKC Specifications

Power

power requirements	120V, 60Hz
power consumption (power ON mode)	40W
power consumption (STANDBY mode)	5W

Output Terminals

analog output	2V/5kΩ
headphones output	4mW/32Ω
digital optical output	–21dBm - –15 dBm

Weight and Dimensions

dimensions (W x H x D)	435mm x 127mm x 334mm
mass	6.3kg