JVC XL-R5010BKC User Manual

13
English English
To stop CDR playback temporarily
• Pressing the CDR Control PAUSE 8 button at any time when a
CD is playing in the CDR pauses playback. Press the CDR Con-
trol PLAY 3 button to resume playback.
• When playback is paused, the 8 indicator is shown in the dis-
play window.
Removing a CD from the CDR
• To remove a CD from the CDR, press the CDR EJECT 0 but-
ton. To remove a CD when it is being played back, it is recom-
mended that playback first be ended by pressing the CDR
Control STOP 7 button before pressing the EJECT 0 button.
After pressing the EJECT 0 button, the tray will open and the
CD can be removed. Press the EJECT 0 button once more to
close the tray.
Notes
• When an unfinalized CD-R or CD-RW is loaded in the CDR
and the CDR EJECT 0 button is pressed to open the CDR disc
tray, “FINALIZE?” is shown in the information display. If you
do not wish to finalize the CD at that time, press the CDR
EJECT 0 button again. For more information on finalizing a
CD, see page 28.
• If playback of an unfinalized disc is stopped or if tracks are
skipped (forward or reverse), some data of the track (or begin-
ning of next track in the case of skipping) may be cut (not read)
when playback starts again.
• The total track time does not always match total playback time
(time shown in the information display) exactly because the
playback time includes lead-in and lead-out spaces as well.
The buttons on the remote control can be used to control 3-CD
changer playback and CDR recording and playback. When using
the remote control, be sure to point it directly at the front lefthand
side of the main unit (facing you) when pressing the buttons.
1
Press the CD or CDR button to select the
device.
CD button: To control discs in the 3-CD changer
CDR button: To control the disc in the CDR
• Pressing the CD1, CD2 or CD3 button automatically sets the
unit to the 3-CD changer and starts playback of the disc in the
selected tray.
• When the CD function is selected, the CD PLAYER indicator is
shown in the display window. When the CDR function is
selected, the CD RECORDER indicator is shown.
2
Press the command button of the operation you
want to perform.
• The buttons on the remote control perform the same operations
as the corresponding buttons on the main unit.
• The command is applied to the 3-CD changer or CDR depend-
ing on the function currently selected.
PAUSE
Using the Remote Control to
Control Playback
STANDBY/ON
CD1 CD2 CD3
CD REC
PLAY
MODE
•
REC
REC MUTING
REC
SOURCE
MENU
PITCH
0
C
H
A
N
C
E
L
REPEAT CD
PITCH
+
SET
PITCH–
RM
–
SXLR5010A REMOTE CONTROL
CDR
CD EDIT FINALIZE DISPLAY
1 2
4 5
7 8
3
6
9
10
+
10
FAD E SYNCHRO
CONTROL
1
2
CD1, CD2, CD3
XL-R5010BK.book Page 13 Monday, June 4, 2001 11:40 AM

JVC XL-R5010BKC Specifications

Power

power requirements	120V, 60Hz
power consumption (power ON mode)	40W
power consumption (STANDBY mode)	5W

Output Terminals

analog output	2V/5kΩ
headphones output	4mW/32Ω
digital optical output	–21dBm - –15 dBm

Weight and Dimensions

dimensions (W x H x D)	435mm x 127mm x 334mm
mass	6.3kg